Revive Your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware: A Step-by-Step Guide
Cktel P9 Plus Flash File MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware
Introduction
Do you have a Cktel P9 Plus smartphone that is stuck on the boot logo, has a dead LCD display, or is running slow and buggy? If yes, then you might want to flash your phone with a new firmware that can fix these issues and improve its performance. In this article, I'll show you how to flash your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware, which is a custom ROM based on Android 5.1 Lollipop. This firmware will not only revive your phone's LCD display, but also enhance its features and stability.
Cktel P9 Plus Flash File MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware
Download File: https://www.google.com/url?q=https%3A%2F%2Fvittuv.com%2F2tX6Os&sa=D&sntz=1&usg=AOvVaw0UnZPxjQrm6auVoKa9zfH7
But before we get into the flashing process, let's first understand what a flash file is and why you need to flash your Cktel P9 Plus.
What is a flash file?
A flash file, also known as a firmware or a ROM, is a software package that contains the operating system and other files that run on your smartphone. It is stored in the internal memory or the flash memory of your phone. A flash file can be official or unofficial. An official flash file is released by the manufacturer of your phone and is usually updated through OTA (over-the-air) updates. An unofficial flash file is developed by third-party developers and is usually customized to add extra features or remove unwanted apps.
Why do you need to flash your Cktel P9 Plus?
There are many reasons why you might want to flash your Cktel P9 Plus with a new flash file. Some of them are:
Your phone is bricked or stuck on the boot logo due to a corrupted or incompatible firmware.
Your phone has a dead LCD display due to a hardware or software fault.
Your phone is running slow, laggy, or buggy due to malware, viruses, or outdated software.
Your phone has low storage space due to bloatware or unwanted apps.
Your phone has poor battery life or performance due to old or inefficient software.
You want to upgrade your phone's Android version or change its user interface.
You want to root your phone or install custom recovery or mods.
What are the benefits of flashing your Cktel P9 Plus?
Flashing your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware can bring you many benefits, such as:
It can fix the LCD display issue and make your phone's screen alive again.
It can unbrick your phone and make it boot normally again.
It can remove malware, viruses, bloatware, and unwanted apps from your phone.
It can free up storage space and improve memory management on your phone.
It can optimize battery life and performance on your phone.
It can update your phone's Android version to 5.1 Lollipop and give it a new look and feel.
It can enable root access and custom recovery on your phone.
It can enhance the features and functionality of your phone.
Now that you know what a flash file is and why you need to flash your Cktel P9 Plus, let's move on to the next section where I'll show you how to do it.
How to flash your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware
In order to flash your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware, you'll need some tools and files on your computer and some preparations on your phone. Here are the requirements:
Requirements
Download links
You'll need to download the following files on your computer:
The MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware for Cktel P9 Plus (link: https://www.mediafire.com/file/7f6v8q7yq7xjx8a/Cktel_P9_Plus_MT6580_5.1.zip/file)
The SP Flash Tool (link: https://spflashtool.com/download/SP_Flash_Tool_v5.1952_Win.zip)
The VCOM drivers for MediaTek devices (link: https://androidmtk.com/download-mtk-usb-all-drivers)
Download these files and save them in a folder on your desktop for easy access.
Backup your data
Flashing your phone will erase all the data on it, including contacts, messages, photos, videos, apps, etc. Therefore, it is highly recommended that you backup all your important data before proceeding. You can use any backup app or tool that you prefer, such as Google Drive, Dropbox, Titanium Backup, etc. Alternatively, you can copy all your data to an external SD card or a computer using a USB cable.
Charge your battery
Flashing your phone requires a lot of power and can take some time. Therefore, it is advisable that you charge your phone's battery to at least 50% before starting the process. This will prevent any interruptions or failures due to low battery during flashing.
Steps
Once you have met all the requirements above, you are ready to flash your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware. Follow these steps carefully:
Install drivers and tools
Extract the SP Flash Tool zip file that you downloaded earlier and open the extracted folder.
Double-click on the file named "flash_tool.exe" to launch the SP Flash Tool application.
If you see a Windows security prompt asking for permission, click "Yes" or "Run".
If you see an error message saying "Not enough storage is available", click "OK" and ignore it.
You should see the SP Flash Tool interface like this:
Now extract the VCOM drivers zip file that you downloaded earlier and open the extracted folder.
You should see several folders named after different Windows versions (such as Win7, Win8, Win10).
Select the folder that matches your Windows version (for example, if you have Windows 10, select Win10).
You should see several files inside the folder. Right-click on the file named "InstallDriver.exe" and select "Run as administrator".
If you see a Windows security prompt asking for permission, click "Yes" or "Run".
A command prompt window will open and install the VCOM drivers on your computer automatically.
You should see a message saying "Press any key to exit" when it's done. Press any key on your keyboard to close the window.
Congratulations! You have successfully installed the SP Flash Tool and the VCOM drivers on your computer. Now let's move on to the next step.
Extract the firmware file
Extract the MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware zip file that you downloaded earlier and open the extracted folder.
You should see several files and folders inside the folder. The most important one is the file named "MT6580_Android_scatter.txt". This is the scatter file that contains the information about the partitions and locations of the firmware on your phone.
Copy this file and paste it in the same folder where you extracted the SP Flash Tool earlier. This will make it easier to load it later.
Well done! You have successfully extracted the firmware file and copied the scatter file to the SP Flash Tool folder. Now let's move on to the next step.
Launch SP Flash Tool
Go back to the SP Flash Tool folder and double-click on the file named "flash_tool.exe" to launch the SP Flash Tool application again.
If you see a Windows security prompt asking for permission, click "Yes" or "Run".
If you see an error message saying "Not enough storage is available", click "OK" and ignore it.
You should see the SP Flash Tool interface like this:
Click on the "Download" tab at the top of the interface.
You should see a new interface like this:
Great! You have successfully launched the SP Flash Tool and switched to the download mode. Now let's move on to the next step.
Load the scatter file and select options
Click on the button that says "Choose" next to the label that says "Scatter-loading File".
A file browser window will open. Navigate to the SP Flash Tool folder where you copied the scatter file earlier.
Select the file named "MT6580_Android_scatter.txt" and click "Open".
The SP Flash Tool will load the scatter file and display a list of partitions and files that are part of the firmware. It should look something like this:
Make sure that all the boxes in front of each partition are checked. This means that all the partitions will be flashed with the new firmware.
Underneath the list of partitions, you'll see some options. Make sure that they are set as follows:
"Download Only": This means that only downloading (flashing) will be performed, not formatting or erasing.
"DA DL All With Check Sum": This means that a checksum verification will be performed before and after flashing to ensure data integrity.
"Storage Checksum": This means that a checksum verification will be performed on your phone's storage before flashing to ensure compatibility.
Excellent! You have successfully loaded the scatter file and selected the options for flashing. Now let's move on to the next step.
Connect your phone and start flashing
Turn off your Cktel P9 Plus phone completely. Do not connect it to your computer yet.
Press and hold both the volume up and volume down buttons on your phone simultaneously. This will put your phone in download mode.
While holding both volume buttons, connect your phone to your computer using a USB cable. Make sure that you use a good quality cable and a working USB port on your computer.
The SP Flash Tool will detect your phone automatically and start flashing it with the new firmware. You'll see a progress bar at the bottom of the interface indicating the flashing process. It should look something like this:
Wait patiently until the flashing process is completed. It may take several minutes depending on your phone's storage size and speed.
When the flashing process is completed, you'll see a green circle with a check mark in it at the center of the interface. It should look something like this:
Congratulations! You have successfully flashed your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware. You can now disconnect your phone from your computer and turn it on normally.
Fantastic! You have successfully completed all the steps for flashing your Cktel P9 Plus with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware. Now let's move on to the final section where I'll show you how to verify that your phone is successfully flashed.
How to verify that your Cktel P9 Plus is successfully flashed
In order to verify that your Cktel P9 Plus is successfully flashed with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware, you'll need to check some things on your phone after turning it on. Here are some ways to do that:
Check the boot logo and Android version
The first thing you'll notice after turning on your phone is the boot logo or animation that appears on your screen. If you see a different boot logo or animation than before, it means that your phone has been flashed with a new firmware. For example, if you see a boot logo like this:
It means that your phone has been flashed with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware, which is based on Android 5.1 Lollipop. You can also check your Android version by going to Settings > About Phone > Android Version on your phone. You should see something like this:
If you see Android 5.1 as your version, it means that your phone has been updated to a newer Android version than before.
Test the LCD display and touch screen
The second thing you'll want to check after turning on your phone is whether its LCD display and touch screen are working properly or not. If you had a dead LCD display issue before flashing your phone, you should see that it has been fixed after flashing it with MT6580 5.1 Lcd Dead Fix 2Nd Update Firmware. Your phone's screen should be alive again and responsive to touch inputs. You can test this by swiping, tapping, pinching, zooming, etc. on your screen and seeing if it responds correctly or not.
Check the IMEI and network connectivity
The third thing you'll want to check after turning on your phone is whether its IMEI (International Mobile Equipment Identity) number and network connectivity are intact or not. Sometimes, flashing a new firmware can cause IMEI loss or network issues on some phones. To avoid this, make sure that you flash only compatible firmware for your phone model and region. You can check your IMEI number by dialing *#06# on your phone's dialer app or by going to Settings > About Phone > Status > IMEI Information on your phone. You should see something like this:
6580 5.1 Lcd Dead Fix 2Nd Update Firmware:
Question
Answer
What is the difference between official and unofficial firmware?
Official firmware is released by the manufacturer of your phone and is usually updated through OTA (over-the-air) updates. Unofficial firmware is developed by third-party developers and is usually customized to add extra features or remove unwanted apps.
What are the risks of flashing your phone with a new firmware?
Flashing your phone with a new firmware can be risky and can cause some issues, such as data loss, IMEI loss, network issues, bootloop, brick, etc. Therefore, it is important that you backup your data, charge your battery, and follow the steps carefully before flashing your phone.
What are the advantages of flashing your phone with a new firmware?
Flashing your phone with a new firmware can be rewarding and can bring some benefits, such as fixing issues, improving performance, updating Android version, changing user interface, enabling root access, etc. Therefore, it can be fun and exciting to flash your phone with a new firmware.
How to restore your phone to its original state if something goes wrong?
If something goes wrong during or after flashing your phone with a new firmware, you can try to restore your phone to its original state by flashing it with its official or stock firmware. You can find the official or stock firmware for your phone model and region on the internet or on the manufacturer's website. You can flash it using the same SP Flash Tool and steps that I showed you in this article.
Where to find more custom ROMs or flash files for your Cktel P9 Plus?
If you want to try more custom ROMs or flash files for your Cktel P9 Plus, you can search for them on the internet or on some websites that specialize in providing custom ROMs or flash files for various devices. Some examples of such websites are Needrom, Firmwarefile, Romkingz, etc. However, make sure that you download only compatible and reliable firmware for your phone model and region and that you scan them for viruses or malware before flashing them.